Questions & Answers for: Jeep Cherokee balance

harmonic balancer rubbing on the timing chain cover i recently bought a 89 jeep cherokee 4x4 4.0 L. I noticed some motor oil under the motor. when i looked i thought it was the front crank shaft seal.

Ad

Remove the harmonic balancer without a puller? Is there anyway to remove the harmonic balancer without a puller? If that cannot be done, if I rent a kit will It be able to remove the balancer without ...

Ad

Question about 1991 Cherokee Limited

1 Answer

Harmonic balancer seems to be out of alighnment with other pulleys ,Keeps throwing off the belt HELP check the balancer to see if outer ring has started to walk off the center hub...(common on these) ...

Question about 1996 Cherokee Country

1 Answer

Cooling fan hits the harmonic balancer. Took the fan blades off and the belt still runs off the pulley. Something seams to be miss aligned but I cant see what it is. Your harmonic balancer is coming ...

i need to know how i can take a harmonic balacer off my motor with out taking it a part? You will need to remove anything interfering with a balancer removal tool. You will need to remove the drive ...

...supply a lot of info but generally a consistent shake at a particular speed is caused by wheel balance being off. Before having the balance checked look at the wheels inside and outside. Many ...

Question about 1999 Cherokee

1 Answer

I can't find the right harmonic balancer for my '86 jeep cherokee. I need one for a v-belt type (it has two belts on the one balancer going different directions). the one i keep finding is for

Question about 2000 Cherokee

1 Answer

seperated harmonic bal how to repair seal and balancer If you are talking about the rubber in the balancer itself. You can not do this. Balancers are fairly inexpensive. I would get one at a junk yard

Question about 1996 Cherokee

2 Answers

we need to remove the harmonic balancer without the tool because we dont have time to get a tool. would a crowbar work? You'd have a real hard time doing it that way, and you would have to turn ...

...bearings on the crankshaft, but you said a rattling noise, these pulleys are bolted to the harmonic balancer check the bolts that attach the pulley to the balancer to see if they are tight. Sometimes ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Manuals & User Guides

Loading...