Questions & Answers for: bad power

...I have nothing indicating power at output of supply. Nothing coming out from the power supply would signal a bad power supply. The power supply is bad. Replace it. It may have blown a fuse

Ad

...bad power supply, bad backlight inverter, and bad lamps. See example of failed monitors due to bad caps here: http://s807.photobucket.com/home/budm/allalbums 90% of monitors I repair are due to bad ...

Ad

...bad power adapter, bad power jack, bad/damaged wire at power adapter or at power adapter tip, or bad/loose charger tip. If it is a Toshiba, it is most likely the tip. If it is a after market power ...

Question about Perfection 3170 Flatbed Scanner

1 Answer

bad power adapter (more common) or a bad mainboard. test the connector with a volt meter and see if you are getting power, if so, bad main board, if not bad adapter. power adapter is $32 main board is

Question about Perfection 3170 Flatbed Scanner

1 Answer

...bad power panel. For bad ic you will have to assess all the panels in the unit to be able to detect the ic that is faulty, for bad capacitor you will have to assess all the power panel or the main ...

...is bad. But if the solenoid is not getting power with the key in the start position, then the ignition switch is bad. check if powers going to it when you turn the key if theres power bad ...

Question about UL50Vt Notebook

1 Answer

...power cord is bad or the DC Power Jack where the power cord plugs into the laptop is bad.  If either of them is bad they will not charge a good battery. Check your DC Power Jack which is where ...

Question about UL50Vt Notebook

1 Answer

...power cord is bad or the DC Power Jack where the power cord plugs into the laptop is bad.  If either of them is bad they will not charge a good battery. Check your DC Power Jack which is where ...

...bad, or Power On switch is bad, or Power Supply is bad. Or the receptacle you have it plugged into is bad. I have had a few surge protectors, where just ONE of the receptacles was bad. (Hmmm, surge ...

...this. later about 1996 the ECU uses CKP sensor to run the tach directly in that case bad tach, bad wires to tach or bad power feed to it. it only has 3 wires. power ground sig one is bad, or its

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...