Questions & Answers for: Kenmore bad gas

...bad gas module. Or a bad gas valve without enough pressure. Needs to be diagnosed hands on at your location . Thank You For trusting us with your question Please remember to leave a solved rating ...

Ad

Question about 79012 / 79014 / 79019 Gas Kitchen Range

1 Answer

...gas to the stove first of all. If you are then the pressure regulator is either not set right or bad. Lots of times they do go bad if they sit up a while and no one bothered to cap off the

Ad

Question about 79012 / 79014 / 79019 Gas Kitchen Range

1 Answer

...times for it to work, now its getting worse the ignitor is bad it makes a spark to light the gas, don't worry about a gas leak theres a safty switch for the gas not to come out which might be bad ...

Question about 79012 / 79014 / 79019 Gas Kitchen Range

1 Answer

...gas valve is bad or maybe a bad flame sensor. If the ignitor is glowing and you have replaced the booster coils mounted on top of the gas valve then your gas valve is probably stuck shut. Before ...

...the nut that connects the gas to the valve and listen to hear gas leaking out,if the gas is coming to dryer,coils, ignitor and check the sensor ,if they check good with meter you have a bad gas ...

...drum turns vent is clear Likely you have a bad gas valve coil set. There are two small black cylinders on top of the gas valve... if these are bad they will not open the valve to let gas come

...it heats and sometimes it doesn't and sometimes it leaks gas Hi, Your problem sounds like either a bad safety gas valve or a bad coil on the valve. If i can help with anything else please let me

...bad gas coils or a bad gas valve,let me know if it's glowing and send the full model number,you shouldn't jump out any of the parts,just check them with a meter,if it's bad change it out,if the fuse ...

...the gas valve go bad... Other problems can be the thermostat, the high limit, or the thermal fuse going bad... Here is a tip that I wrote about not heat in gas dryers... gas no heat tip.... ...

Question about 73952 Gas Dryer

1 Answer

...bad gas coils located on top of the gas valve,when the coils are bad they can work for the first 10 to 20 minutes until the coils get hot and then they fail and you'll see the ignitor glowing orange ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Dryer Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...