Questions & Answers for: bad copies ricoh

...Ricoh Aficio 1018d copier but its not copying properly, half the words are missing its ghosting out towards the edge of the paper. It happens when using the feeder or placing it on the glass. Can ...

...ricoh 1022 its give the image repeat problem i cheak the drum fusing is ok .befor drum copy is ok when enter the fusing then its starts like this two machine same problem its same place plz send me ...

...copies and overtoning is probably caused by the developer going bad. Do you have a service contract on your copier? It's likely time for a whole PM (preventive maintenance) procedure. The sc990 is ...

copies. With out seeing copy here is my thought either bad drum if it is streaks down copy or laser unit for yellow is out of alignment . In user tools there is a maintance tab go into it and do color

...copies lines becomes faint and more faint and then disappear. There is no drum problem becaus I commonly use my machine as printer to obtain direct print from my laptop. In this condition also lines ...

ricoh copier 5000 bad copy quality black copies can u upload the sample copies? just want to understand, blur, dirty, lines etc..

...the bottle therefor not toning up copies could be photo conductor is bad / toner motor or board . If tech service mode then 5 804 output check and find one for toner motor turn on and see if it

...but it prints blank copies. i tried to ran as many copies as i can with hope that it will start printing but still it didnt help. sounds like photo conductor is bad will need to rebuild or replace ...

...see does it got better. If is ok then return back the toner bottle and the machine will continue to work. If still the copy is bad then make more copies without toner bottle until the image is

bad copy quality on ricoh mp 402 Not much info... Bad pcu assy. Possible bad PCU or fuser lever on envelope. Yup need more info.