Questions & Answers for: Isuzu Rodeo bad brakes

...some sort of relay that needs to be changed No,you just have to check ground wiring.,could be very bad ,another things are bad conection on globes seats.Clean that truly and problem is solved.

to move. i have to release brakes and apply again to be able to stop> your master cylinder is gone. when stopped apply pedal and hold let up slightly then reapply if pedal sinks to floor master is bad

brakes my brakes was bad i need to 2 pumps before it will stop IF THE BRAKE FLUID IN THE MASTER CYLINDER IS FULL U HAVE A BAD BRAKE MASTER CYLINDER

brakes rear tail lights come back on. Most likely a bad earth to the light's. Re-earth the tail lights should sort the problem. What most likely you have on the rear lights is a bad ground between the

...the brake pedal the brake light goes off; with the light off the brake light works ok. YOU HAV A BAD EARTH IN THE CLUSTER AND CAUSING THE POWER TO USE THE OTHER CIRCUITS, U NEED TO REMOVE THE UNIT ...

...just brakes rotors-drums if bad additional brake jobs can be $100 up to $400 all depends on how it looks when the wheel is pulled off -- replacement on engine $1000 and up not including price of ...

Brakes work fine. what can I do to turn it off? Maybe it is the sensor for your park brake lever-it thinks your park brake is on. These can go bad also-check and see if yours looks faulty-if its cheap

...brakes brake pedal goes to floor , replaced master cylinder twice and bleed lines many times. ABS light goes on occasionally 2 year problem no mechanic can diagnose. You have a leak in the brake ...

rr antilock code stays on and the vehicle shakes badly when brakes are applied. Redid the brakes all around, but still shakes. hey did you turn your rotor because if you didn't it will cause your ...

...bad or its wires or pins rusty. brakes: the brake lamp has 3 inputs ("OR" logic) master cylinder level low. the hand brake lever and the EBCM (electronic brake control module) a technician unplugs ...