Questions & Answers for: Dodge Intrepid bad brakes

...bad shimmy when brakes are applied tierod could cause shake w/braking.replace tierod and do alignment, if it still shakes when braking then brake rotors are warpped.you machine rotors depending on ...

...is, and sometimes it is really bad. A couple of times it has persisted even when I'm not applying the brakes. you either have metal to metal in the wheel for the brake shoes or something has come ...

...it to see if you can get the light to go on/off. If the lever is disengaged you probably have a bad switch or bad wiring to the

...bad Brake Light Switch, which is located on your Brake Pedal. The switch is activated when you step on the brakes it sends a signal to the Brake Lights to turn the lights on when the pedal is ...

The brake lights in my 2001 dodge intrepid wont work. The lights are not bad and neither is the fuses?? There is a switch up the rod down to your brake pedal. This switch may be bad.

...can unplug the switch and jump the wires and see if they come on, if they do, your brake switch is bad the brake light switch is under dash right on top of the brake pedal bet thats the problem let ...

...brakes would not stop when I was driving down a hill. What could be wrong? my car is a 1995 Dodge Intrepid with a 3.5 engine check your brake booster vacuum hose and check valve for leaks,if no leaks ...

...BAD.I STILL SAY YOU HAVE AIR IN BRAKE SYSTEM.YOU NEED TO BENCH BLEED BRAKE MASTERCYLINDER AND BLEED FRONT CALIPERS AND REAR BRAKE CALIPERS. BY YOUR CAR BEING ABS BRAKES SYSTEM BEST TO LET DEALERSHIP ...

...bad about the brake booster seal allowing a vacuum leak when the brakes are applied, If the brakes are real hard to push and its not stopping properly you'll need a new brake booster. However, if its ...

...brakes and calipers but the brake pedal doesn't go down any suggestions please If it is hard to stop (brake doesn't go down). Check the vacuum line to the brake booster. Or the booster diaphragm is ...