Questions & Answers for: JVC bad antenna

...bad. Any idea what I can do to make the auto muting go away? The FM antenna is plugged in. Thanks for any tips! I had the same problem. I had bad antennae connection. I re-did the antennae conection ...

...bad reception areas you can get an external FM "rabbit ears" type antenna but you'll need the "European" style of 300 ohm to 75 ohm transformer to plug it into the unit's FM connector (one that has a ...

...bad antenna or antenna cable. FM signals are measured in microvolts and are easily influenced by poor antennas or a mashed antenna cable. how is the reception on AM ?- if the antenna is the problem ...

...will not tune in to any radio stations, just keeps searching for them, can hear de tuned stations badly. All connections are ok. Any suggestions? Thanks standard problem would be antenna issue.

...clears up reception you have a bad or grounded antenna. Follow the antenna wire back to the windshield or fender etc. mounted antenna, sometimes there are other plug in points that get knocked

...antenna isnt attached and the grounds unplugged the sound will come out but a little fuzzy, what could be wrong? bad connection in one of the speaker wire. it could be a speaker wire touching on the ...

antenna is bad - still no reception? The probably the radio. Hope that resolves it. My pioneer had the same problem after installing via the wiring harnesses into my BMW. Pulled it back out, there was

...Try swapping the boombox antenna with the car dock to see if you get the same problem. If yo do, you know the boombox is bad. Otherwise, its the antenna and you just need to get a

...bad for static - if you're in a "Winter" climate. Receivers have a very sensitive FET or MMIC amplifier right inside from the antenna connection to make it better for picking up distant stations. ...

...antenna , if so check the leadin wire Yeah, clearly a bad connection to the source and since you mention static I too assume you are going from an OTA source. If it has always done this you just need ...