Questions & Answers for: Ford Ranger get back off

off? On my 1998 Ranger, a few years back, I had the same problem. I drilled off the head of the bolt out as I recall. The plastic retainer lifted off and the battery was now able to be removed. Then I

...back off and i have kept the engine running by spraying short bursts into the carburetor but when i stop spraying it just cuts right back off. sounds like the auto choke isnt turning itself off ...

back of the mirror backing in order to prevent the mirror from just falling or moving on its own should be able to take panel off inside dore just at the mirror area with phillips srew driver and then

off there is a rail on both sides of the door. One of them has came loose. determine which one and put it back on the window and then make sure to tighten it back down. then put panel back togther. it

...back off. For some reason the back will not come off. Is there a special tool needed? Please help. yes you can buy at your local parts store for around $15 Yes there is a trick. You need a Ford fuel ...

back it off, go easy. Basically you are using a smaller nut to cut new threads on the stud. A little oil on the stud helps. The danger is if you get the new nut started and put to much pressure on the

...from brakes? on a ford ranger 03' look on the back side there should be littlte rubber plugs pop them out and you should see a star wheel back it off to release the shoe then gently pry off the ...

...back off the self adjuster by pulling off the dust cover on the back of the hub and sticking a screwdriver in to adjust. You can see the adjuster wheel in the lower right corner of the picture below. ...

...back it off a 1/4 of a turn max. If you do not have this dust cap, it is rust holing the rotor on (or somebody has welded it on, I have seen this before on explorers but I have no idea why) Use a ...

...back off i pulled the switch out was pretty hot to touch i unplugged it and tried to run a wire cross plugs to get a temp fix seen a small arc so i quit plugged back in lights worked but my batt. ...