Questions & Answers for: back brakes

back drum brakes need to know how too remove back brake drum on a 2002 dodge dakota pick up truck. Remove the rubber plug at the back of the backing plate. Take a brake adjusting tool or screw driver ...

...back brakes, and the master cylinder. Check your brake fluid before taking it back and make sure it's full, if so, you may just have air in the brake lines. If this is the case, either they forgot to ...

...back brakes 1999 ford windstar, back brakes are grinding, brake light on does it have rear disc brakes or drum brakes, if disc brakes should be changed just like the front and you might have an ...

...brakes working both bulbs good the center and brake light are not on the same circuit, check voltage coming from the switch do the signal lights work at the back if so then yes the bulbs ...

...the brake rotor.and check brake fluid level in mastercylinder.dont drive car until you get firm solid brakes. they need to be wound back full details here:- ...

...brakes went back to acting up. then light came back on, added more fluid so that I could make trip back home. about 10 miles into ride home light came back on. When I got home and pulled in the ...

...brakes so you will need to break by putting pressure on the ground with your shoed foot. Plus the brake can get really heated when abusing the back brake. I would NOT try to "experiment" using the ...

...back brakes so I suggest you bleed back brakes (preferably bleed the whole brake system). In my car (not bolero though) there is some kind of braking power balancing system with extra bleeding screw ...

...back brakes,Autozone will loan it to you for 60 bucks,you will get it back when you return,I used it.I replaced brake pads front and back and both back rotors.The driver side rear had metal on ...

Blue Max 8902: 45cc chainsaw. To attach the bar and chain it says to pull back on chain brake. The chain brake will not pull back. What am I missing? What am I missing? What is a bar knob? I would ...