Questions & Answers for: av1 display

...to the AV1 channel On Sky the AV1 symbol does not go out but stays on screen. How can I suppress this symbol (top left in green) from the screen? on original sony remote press the DISPLAY button ...

...my Sky+ remote the AV1 caption is always on the screen? I saw a guest solution on the site - but can't understand what has been written, it doesn't make any sense? press DISPLAY on the sony ...

Sanyo 68cm. AV1 is Black and White. AV2 and normal Tv is OK When I plug video a video cable into the AV1 port on the back of the tv it displays only in black and white. It doesn't matter weather its ...

...are plugged in. I can only think that I hit the wrong button on the remote somehow. Fixed it - the issue was that the TV would not display AV1 and I had to go through a number of steps to find

(or vga/DVI/HDMI depending on graphic card)from your graphic card to AV1 in. same port as sound. Now select AV1 on HTS. If no picture on tv make sure you computer graphic card is set for dual display

...I've mentioned above). If the AV1 or AV2, etc. input is not active (not switched on) then that input will only display a blank (black) picture in the top left corner of the screen. Hope this

...AV1 shows on vcr display you can do this by pressing button on remote marked with ( input / source or a picture with a arrow pointing into a tv you can only record the station that the digital box or ...

...located in av1 &/or av2 jacks respectively. ps3 powers up. no display appears on monitor. hold power button for two peeps--> will reset video to lower sittings-->restart; will show ...

...AV1 port. If I use Av2 port it display picture in black and white. Please suggest. I expect if you look at the menu you will find that AV2 is set up as S-Video or Component etc. etc. Set it up as ...

...all remote I have a one for all remote and need to know the code to remove the green av1 channel display in corner. thanks. Press the "Display" button on the remote control to get rid of