Questions & Answers for: aux sends

...to the behringer xenyx 2442fx mixer? hook it up to one of the aux output sends (1 or 2), and use the corresponding aux send knob per channel to put each channel necesarry into the monitor

I have a behringer 16 channel board . the 2nd aux send in not working as of last week. What's the general problem that happens when an aux send stops working?................. I don't believe this ...

I am trying to run a monitor using the Aux Send on a Mackie Board but even with the Master Aux Send turned up there is barely any sound coming out when I try to use my microphones. Also, I noticed ...

...AUX SENDS (p.17/18), AUX MASTERS (p.19), STEREO CHANNEL LINE IN (p.14). If you require more precise EQ parameter control of FX return signals - and you have sufficient spare channels on the desk, ...

...THROUGHT THE BEHRINGER MX1804X? If you're trying to get a monitor feed from this unit, use the "aux" send. Connect the "aux send" to your monitor amp. The main Aux fader provides "master" level ...

sends per say but instead calls them "Aux's." Adjust the proper Aux for the input channel 1-16 and use the Aux output section (row of knobs above output sliders) as the master volume. By using Aux 1-4

...aux sends. Now adjust the monitor mix using the appropriate aux send pot on each of the channel strips you want to send to the monitor. Think of the aux send pots as faders for the monitor mix the ...

where does my aux output go to from my receiver do I need something to loop it to. another system maybe? The aux output is usually the connection you use to send the signal to another component such ...

...aux sends for monitors ? Hi, What you need to do is connect (for example" Aux 1 send from the desk to the Left Input of the alesis. Then connect the Left and right output form the Alesis to Auxilery ...

...illuminate (but works by pressing down and turning the knob). Any idea why it's not on? Also the AUX 1 Send doesn't seem to be working thanks! It sounds like you're experiencing a couple of issues ...