Questions & Answers for: aux phono

Question about Audio Players & Recorders

2 Answers

...a non phono input like Aux, tape or tuner. Radio shack sells cheap ones and you will hear what you pay for. I sell turntables and audio gear, check out www.soundsciencecat.com Good Luck, Neal Van ...

Ad

...aux or phono. This is a Technics Sa 200 You'll want to use the AUX, because it, for sure, does not have any RIAA equalization, which the phono input may or may not have. Short answer: Plug the mp3 ...

Ad

Phono to the AUX inputs the volume has to be turned all the way up just to hear any sound. PHONO requires a phono-equipped receiver, which the STR-DE598 appears to NOT be. AUX will not work because it

Question about RS2041 CD Shelf System

1 Answer

...Phono OUT? Speaker IN? Speaker OUT? CD IN? CD OUT? Look for the one marked AUX IN or AUX OUT. AUX IN lets you connect a separate device, could be colored Blue, Green, White. Usually paired one over ...

Question about RS2041 CD Shelf System

1 Answer

...SR Model 2220B. Have tried both "Aux Phono" connectors without success. What type of TT? Old school should work ONLY on the Phono. Self-pre-amplified use the Aux. Perhaps the TT has a

Question about RS2041 CD Shelf System

1 Answer

...low volume is set at max.if its the wrong amp what amp with right inputs will i need thanks Almost turntables have no pre-amp, if your Onkyo has phono input then unplug from aux and plug into ...

Question about RX-V396 Receiver

1 Answer

aux of your amp if the record player comes with built in phono preamp. If not you need a phono preamp between the record player and amp or an amp which have a phono input. Phono preamp is available in

...AUX not PHONO but cannot see AUX on receiver. Any hints? You need to hook it up to another analog input other than the phono input. The record player has a built in preamp, and the receiver's phono ...

...phono channels and aux 4 channel ? All input and earth connections disconnected produces a loud hissing noise on all channels apart from aux channels 1 to 3 are you using a phono pre on the phono ...

...my old Marantz 1060 amp that has a phono input Aux inputs typically require line level audio signals. If there is no phono input on the JVC you can buy external phono amps that will solve the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...