autoprogramming i can only get channels above 51 after autoprogramming my set. I had another tv hooked up using the same cable wire and it works fine. Help!!!! On many televisions with built-in tuners
...you use to tune in cable rather than the TV directly. The easiest way here is to autoprogram the TV while playing a VCR tape. That will insure that channel 3 is included. Does the autoprogram fail? ...
tv channels, it is only showing channels from 2-13 You will have to run the Autoprogram menu function from the menu. Here are the steps Press the MENU button on the remote control. Use the cursor down
Question about 37PF7320A 37 in. HD-Ready LCD Television
...tv, go to menu, find "autoprogram" option and select it. It will scan all available channels. If you are using the box, check to see if box has same autoprogram option. Make sure tv and box is set to ...
...tv and I'm trying to set up our cable. It says we have to autoprogram it, but when I try to autoprogram it, it says erased and stored and then it doesn't work. The tv's work in both other rooms, but ...
I am having a problem autoprogramming my sony tv with the universal remote I have is there another way to do it? The front key pad on the TV itself also has the menu controls and autoprogramming.
...remote control the direct tv receiver. You ned to go into the menu of the TV and let it "autoprogram" the channel memory and then your channel up/down buttons will work once autoprogram is
Question about FD Trinitron WEGA KV-32FS120 32" TV
...tv until you perform autoprogram. To perform autoprogram again [1] Press Menu button. [2] Press to highlight Channel Menu [3] Press Pr Dn button to hilight cable. Press [+] to select. [4] Press Prog ...
TV is hooked up to cable, but when i press autoprogram it doesn't see channels I would regularly see with my other TV. Is there something I'm missing with the autoprogram feature? autoprogram air then
autoprogram to program in your channels, make sure also the TV is in cable mode and not TV mode which is for local channels, If you have cable do a autoprogram so the set can program in channels. Auto
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions