...Auto Scan issue When I use the coax interface from the cable company. I try to auto scan the channels. It gets to about 84% and stops, every time. Any ideas? I have experienced exactly the same issue ...
...auto scan for channels, my channels are different and a lot of them are missing. I had 80 channels before and now only 23. The channels are also different then the rest of my house. What happened and ...
...Auto Scan of the channels When doing a Auto Scan of the channels, the scan stops at 91% and not all of the channels appear. I ran the Auto Scan. Before the scan reached 91%, I pressed the Menu button ...
...Auto channel setup Select "Auto program" Select "ANT in" Select "Auto" Select scanning mode (ALL channels/Analog only/Digital only Start scanning the channels Available channels (analog/digital) are ...
...auto scan The Auto Program Channel Scanning function will not pickup the same channels as previously programmed. The auto scan feature scans the various channel frequencies looking for a signal. Weak ...
Question about Viera TH-42PZ80U Plasma TV
auto scan on my dynex tv, but it is still asking me to do it Im trying to run a channel auto scan on my dynex tv so I can connect the cable to it, but whenever I run it, it as me to do it again. I can
please run channel auto scan Auto channel scan is part of the initial set up procedure. Return to that procedure and repeat auto channel scan.
Question about 37 Class LCD HDTV
auto scan on a Viore Flat screen TV when a box appears staying "Please Run Channel Auto Scan? I done all went to menu used the auto scan once that has completely scanned the words still appear "Please
Question about 37 Class LCD HDTV
...Auto Scan" or "Auto Program" and wait for the TV to scan for available channels. This process may take a few minutes. Once the scan is complete, select "Done" or "Exit" to return to the TV's normal ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions