Questions & Answers for: audio clock

clock appears). press the audio (or function button) and then the hour blinks. press up or down to change setting and left or right to switch from hours to minutes. press audio button. wallah! Rock on

...turn radio off and push clock button until display blacks out. then hold the audio button, time should start flashing. Push arrow buttons to set clock..... Worked like a dream!!!!! Thanks SO ...

...AUDIO repeatedly until clock appears in the display. Press < or > to select the segment of the clock display you wish to set. Pressing < or > will select one segment of the clock display ...

...Audio button again fir about 3 seconds until the clock stops blinking (hours or minutes). I HAVE A DEH-1600 CANT SET THE CLOCK cAN YOU HELP? HOW DO YOU SET THE CLOCK ON deH-P6800MP how do you set ...

...AUDIO" AND HOLD TILL CLOCK APPEARS IN DISPLAY 4)SET CLOCK BY PRESSING UP,DOWN & LEFT, RIGHT KEYS SITUATED NEAR SRC/AUDIO SWITCH. 5)TURN THE STEREO "OFF" AND "ON" AGAIN TO SAVE THE CLOCK SETTINGS . ...

...AUDIO and hold until clock appears in the display. 3) Press AUDIO again to display the setting u need to configure. - when u found clock, press < or > to select the segment of the clock display ...

...AUDIO and hold until clock appears in the display. 3. Press the arrows to select the segment of the clock display you wish to set. 4. Press + or - to set the clock. 5. To cancel clock settings, press ...

cd player turns off and just shows the clock. then hold down the audio button untill the clock starts blinking. use the right set of arrows to change the clock. pless the clock button to save new time

How do youn set the alarm clock http://www2.panasonic.com/consumer-electronics/support/Audio/Portable-Audio/Boomboxes-Radios-Clocks/model.RC-CD500 click on this link for the manual best of luck

...clock: If your audio devices all work with word clock, connect them together using a word clock cable. Connect the cable from the device you designated as Clock Source in step 5 to the input of each ...