Question about DCM24 Convection/Microwave Oven
...Audible Signal Elimination If you wish to have the oven operate with no audible signals, touch HELP GUIDE, the number 2 and STOP/CLEAR. To cancel and restore the audible signal, touch HELP GUIDE, the ...
...Audible signal This function gives an audible signal when the coffee is ready. The factory setting is "On". The display (q) will show " " with the current time.To turn off the audible signal :Press ...
Question about R-1520LW 1000 Watts Microwave Oven
...AUDIBLE SIGNAL ELIMINATION": If you wish to have the oven operate with no audible signals, touch CUSTOM HELP, the number 2 and STOP/CLEAR. To cancel and restore the audible signal, touch CUSTOM HELP, ...
...signal is low. • The BCM determines that the headlamp switch is in the park or head position. Key-In-Ignition Warning The radio activates the key-in-ignition audible warning as requested by the BCM. ...
Question about PLMV169DC Microwave Oven
...oven operate with no audible signals, touch Help, the number 2 and Clear/Off. To cancel and restore the audible signal, touch Help, the number 2 and START. Hope this is helpful. -Best Regards- ...
Question about 2009 Cobalt
signal or anything else from computer system. I have read that it could be the front speakers which are not working either, I was also told it could be the radio, any ideas? The audible warnings alert
signal is low). Lights On Warning The instrument panel cluster (IPC) activates the lights on audible warning. The lights on warning sounds when the following occurs: • The key is not in the ignition.
signal on audible warning as requested by the body control module (BCM). The BCM sends a serial data message to the radio indicating the chime frequency and duration. The turn signal on warning sounds
Question about 2008 G5
...audible warning priority and the pulse rate: Fast rate chime (150 pulses per min) Medium rate chime (100 pulses per min) Slow rate chime (50 pulses per min) Turn signal reminder (will pulse at turn ...
Question about 2008 G5
Audible clicks go at twice the rate of normal. Bulbs check out fine. Signal lights won't illuminate. New fuses get blown immediately. Could it be a module or something else? Audible clicks go at twice
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions