Questions & Answers for: audi cambelt replacement

...Audi A4 - replace cambelt I just took my car into the garage to get the cambelt, tensioner and water pump replaced (it has now done 75,000 miles). I ended up having to pay for a new ' Vibration ...

Ad

Question about 1995 A6

1 Answer

...water pump in Audi A6 Quatro 2'8 but I don't know where to find it.Does anyone have an idea? its run by the cambelt and will be behind the timing covers.will invovlve removing cambelt to ...

Ad

...cambelt and tensioners, timers, seals etc I have an Audi 80 1995, 2.6 V6, Sports Edition. And the water pump looks like its on the way out. There is a rattle and water is leaking. Do I need to just ...

...where can i find thermostate in audi a6 2.5tdi engin I'm afraid to replace it is a cambelt off job. Had mine done on a 2.5tdi a4 avant so had cambett waterpump and tensioner replaced with

How to change my cambelt, and where to buy How to change my cambelt, and where to buy said cambelt ok its not a cam belt its a timing belt its on the passanger side in a front wheel drive car you can ...

...audi a4 is located behind the cambelt on the driver side. To reach in you need to remove the fornt bumper, slide the radiator upport frame forwards (dont disconnect anything) remove the driver side ...

Question about 1996 A4

1 Answer

Cambelt snapped and I would like to know what damage could have been done If the motor is an interference motor the valves could have been bent from contact with the pistons after the timing belt ...

Question about 1996 A4

1 Answer

audi had mega trouble with cambelt tensioners,the belt and tensioner should be replaced EVERY 60k to avoid VERY large bills,(the engine WILL seize)if you have lost a tooth off the belt DO NOT DRIVE IT

...cambelt on a audi 4 2.5 diesel convertable 2005 Hi, The manufacturer recommendation is 100K kilometers, they forget the traffic and idling operation of the engine. Most mechanics would recommend the ...

replaced timing belt car runs smooth no acceleration the cambelt timing is possibly 1 tooth out or alternatively cam sensor was not plugged back in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...