Questions & Answers for: attache swivel

Attaching 26 " lcd to stud wall I have attempted to locate the wooden beams in my stud wall. they measure approx 12 inches apart. I wish to attach a bracket for my 26 lcd television...would it be ...

...- Operating instructions SONY KV9PT40 - - Diplodocs The long and short of it - with the swivel attached to the cabinet still, pull down from the back of the tv and toward you. W had the base off ...

Toshiba Regza lost swivel stand bolts Hi 2008 Toshiba Regza 37'' 37XV503DB During a recent house move I lost the bolts that attach the tv to the swivel stand its supplied with. Does anyone know the ...

...a big deal. You can buy them ready to go, drill a hole and bolt her up. You can also get one that attaches to the barrel, no drilling. Not sure if it will hold the bipod or not, I had to shim the ...

...i should purchase that can swivel? Thanks The wall mount is not made to be fit into the base, it is attached to the back the TV, TV uses what they call VESA mounting which had different pattern for ...

...of the hose there is a swivel to adjust the hose 90 degrees. Where the lower section of the hose attaches to the swivel you will see that if you give the hose about a quarter turn then lift, it ...

replacing riccar 4812 hose To replace just the hose unscrew it from the swivel attached to the back of the vacuum. The replace swivel insert screwdrivers into the tabs holding it to the body (from ...

how can I buy a new antenna for model sony cfm-165tw the antenna was broken off with a about an inch left over that is difficult to remove.. Any way to repair? Many boombox antennas are attached by a ...

how do I attach pet uphostery tool to my Shark Navigator Swivel Plus NV46 go to link below http://www.sharkclean.com/support/manuals/11/vacuums/

...to push to remove the hose. Most Vibrance & 8000 series and older series vacuums have the hose attached to a swivel on the back of the vacuum. The hose can be unscrewed from the swivel. To