you What ever you want. the onkyo reciever allow you to select what input the hdmi inputs are assigned to. you can assign DVD to hdmi 1, or 2, what ever you want. Check the manual how to assign inputs
...assign the input each of the inputs have a number assigned on the back of the unit. in the menu of the receiver assign the the number that the tv is in to TV or DTV or what ever you may have had it ...
input's assign button) and then selecting the track (pushing the tracks select/rec button) above the track. The track select button will light green when you press the input assign button of the input
Question about DP01 All-In-One Recording Package Microphone
assign the input to a different track you have to clear the input assignment from the first track and assign the input to a new track. To clear an assignment press the input assign key, A in this case
Question about 2488 Portastudio Multitrack Recorder System
assign the input to a different track you have to clear the input assignment from the first track and assign the input to a new track. To clear an assignment press the input assign key, A in this case
...on the factory remote, and you should see the on-screen menu appear on your TV. Go to INPUT ASSIGNMENT and choose the input for the DVD and assign OPTICAL 1 or 2... Reply here if you need more
Question about RX-V363 Receiver
INPUT ASSIGN: IN(3) OPTICAL function. The manual list "DVD" as a choice but "DVD" does not appear on the front panel as a choice. It won't let you assign the same input twice. Check to see that DVD is
...assign the optical input to the input you are using, so for instance if you have plugged the optical cable into opt 1 on the onkyo reciever and wish to use the DVD input on the onkyo reciever, you ...
Question about AVR1611 5 Channels Receiver
...used by you. However, if you connect the digital input then you have to configure the input assignment to digital and for analogue input configure as analogue. If you use analogue input and ...
Question about Avr 790 7.1 Channel Receiver Barely Used In Perfect Condition
...input assign. The receiver needs to be told which physical sockets are assigned to what buttons. Once you assign the inputs, then press the corresponding input button. So if you assign HDMI 1 to be ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions