Questions & Answers for: Kia Sedona assembly

How to change the real light assembly on a kia sedona Its a 2004 Sedona and I am wondering if I have to take off the whole bumper to get the light assembly in or is there an easier way I am not seeing

...just finished doing the front drivers bearing on a 2003 kid sedona. the work to take out the wheel assembly is not hard at all . first take off the tire now remove the brakes and the brake assembly ...

Is it hard to get the headlight assembly out to replace a bulb on a 2007 Kia Sedona. I have the grill part off and the other bolts loosened but can't get the assembly out to get to the bulbs to ...

how to remove the rear bumper on a 2005 Kia Sedona 1.Remove rear combination light assembly.A.Remove two mounting screws. B.Disconnect electrical connector from rear side of light assembly. 2.Remove ...

...this morning and my fuel light is on. Does the gauge read full?  If not, change the fuel pump assembly.  The level sensor on the assembly isn't working.  Check engine light on? ...

Rear brakes how to install them Removal 1.Remove rear wheel and tire assembly from vehicle. 2.Remove rear brake drums from hub and bearing assemblies after loosening the two brake drum screws. 3.Be ...

how to remove bumper 1. Remove rear combination light assembly. A. Remove two mounting screws. B. Disconnect electrical connector from rear side of light assembly. 2. Remove bumper assembly. A. Remove

...rail, still can't get head off new assembled engines use an adhesive on the head gaskets during assembly so you may have to use a pry bar in a manifold hole and prise the head loose. Check that ...

how to remove hub assembly 2003 kia sedona If your talking about the rotor assembly, you have to remove the screws in the rotor. Use impact screwdriver to keep from stripping the screws.

Wiper assembly appears to be working but wiper arms don't move I have a 2007 Kia Sedona and the wiper arms are not working. If I remove the arms from the wiper assembly I can see the grooved ...