Questions & Answers for: Hyundai Elantra assembly

...Low Beam Headlight part # 9003ST...back of headlamp bucket..undo connector then twist out bulb assembly...do not touch glass on replacement bulb as your hands oils will cook the new bulb Open

Ad

Question about 2004 Elantra

1 Answer

...the Manifold Absolute Pressure (MAP) sensor. 2.- This sensor is located in the air intake plenum assembly. On some vehicles this sensor is combined with the MAP/MAF sensor. 3.- The IAT sensor is ...

Ad

...up the car, support it properly, remove the wheel ,remove the axle-nut. Remove the brake caliper assembly-- support it properly. Remove the two bolts that hold the hub bracket to the Macpherson ...

How do you change hi beam headlight on the driverside pop hood, look behind the headlight assembly. there should be an assembly you twist and remove the bulb. there should be a curved metal "support".

...Strut),are both in front and back of this car. 2000 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Rear, Driver Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly. $72 2000 - 2006 Hyundai ...

...Steering wheel from the steering column Remove or disconnect the following: Multi-function switch assembly Front and rear console assemblies Lower left side crash pad Instrument panel Instrument ...

...a 10mm socket with an extension that is at least 10 inches long. You need to remove the headlight assembly. Once you remove the bolts on top of the assembly there is one more bolt down low which is ...

Question about 2005 Elantra

1 Answer

...are on breaklights are on Seems that there is a short in the harness or in the front or rear light assembly as when the headlamps are switched the brake lamps are also contacting. So please check

Question about 2005 Elantra

1 Answer

...you see the connector simply give a turn counterclockwise and it will come loose. Now pull the bulb assembly out. The fog lamp will pull strait out of the connector. Replace with a new 9006 bulb. Now ...

...seat belt will not pull out far enough to buckle. Damaged seatbelt replace Sometimes the ratchet assembly goes bad in the seat belt assembly or the belt itself gets twisted inside the mechanism. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...