Questions & Answers for: Honda Odyssey assembly

...is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the ...

Ad

removing rear light assembly on honda odyssey 2006 Instructions say to remove two screws and pull off. I have removed the two screws but the assembly won't pull off. It is pretty loose but appears ...

Ad

How do I remove and replace a tailight assembly? The left taillight assembly has been damaged, but I cannot see how to remove it or how to get at the fasteners that hold this assembly in the fender. I

Can't put rear light assembly back on My Honda Odyssey 2007 had a busted rear light assembly. I was able to remove the old one, but I cannot seem to be able to put the new one back on. There is a clip

...I have the same issue, removing the two screws isn't enough, there's something else holding the assembly in the van but I don't see any other screws. I haven't gotten to the part about unplugging ...

...the mounting bolt from the underbody through the hole in the splash shield. Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the

...will be loose, but doesn't just slide back. There is a plastic pressure fitting that will hold the assembly in place. Applying force to pull the assembly out caused me to crack the plastic panel ...

how do you replace a 2007 Honda Odyssey Tail Light The passenger side Tail Light Assembly on my 2007 Honda Odyssey is broken and must be replaced. I have the replacement unit in hand but can't seem to

How do I remove the taillight assembly on my 2005 Odyssey According to another site, you have to pull the assembly straight back as there is a plastic clip (spear point) in the front holding the ...

Question about 2005 Odyssey

1 Answer

i need to replace the passenger side (tailgate) tail light assembly, but it won't come out after taking the 4 nuts out. Remove 4 screws, and gently pry it off. It is held by a stick adhesive. You can ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...