Questions & Answers for: Chevrolet Venture arm 32

...the wiper motor and the wiper blade does not touch the window on the upper quarter when the blade arm is vertical. suggestions? rear wiper moter making sound the wiper arm is seized so either try ...

...wiper motor, Intermediate settings not working all I have is High,washer works but no motor action, arms do not park themselves when turned off I have to play around with them most of the time I just ...

...in pounds. Hope that helps Valve Rocker Arm Bolt 19 N·m + 30° (14 lb ft+ 30°) A GM dealer shows me another source, which says 32 Nm (24 lb-ft). Not sure which one is right but they screwed up my

...THE WIPER MOTOR ON A 2002 CHEVY VENTURE The wiper motor is under a component called the crank arm assembly.If you remove the plastic cover you will see a torx head screw.There is an arm coming ...

...side wiper when operating moves off of windshield. I believe that a person could take off wiper arm and reposition it to correct problem. Tried to take wiper arm off , but after loosing ...

how do you remove wiper arm on a chevy venture? if there is not a nut on the arm raise the wiper off of the windshield and take a small flat screwdriver and pull the clip out on the side of the arm ...

...when 1999 chevrolet venture wipers in up position when turned off You'll want to check the crank arm. It's under a plastic cover on top of the wiper motor and connects to the wiper linkage. When

front wipers moving slow as possible ..replaced wiper motor and same problem exists. all of arms are lubed well with grease once disconnected from motor everything moves great by hand you dont tell me

I Need The Pushrod Format For My 98 Chevy Venture. The shorter pushrods go on the rocker arms that are closer to the intake side of the head, the longer ones go on the rocker arms closer to the ...

2000 Chevrolet Venture van wiper arm postion? We replaced the front wiper arm assemble after the driver side spline was stripped. How do the blades "interact"? Does the passenger side arm ...