Questions & Answers for: Minolta aperture

...my photos to be grey? under exposure or no exposure would give you gray photos I thinks is it the aperture stucked on f22 you can find a place to fix the problemo or use lenses that got the

...and it is really hard to see through the viewfinder? Thanks Chris I no the older Minolta's had an aperture problem the pictures when zooming out after they were developed were very dark. But inside ...

minolta X-370N aperture very slow I have a used minolta X-370N that the aperture moves very slowly. On the inside of the lens - it looks like there is something darker in spots on the aperture. Is ...

...is - then the light is less than optimal and you need to lower the shutter speed or open the aperture setting (make the f number less). If the reading is + then the light is too bright and you ...

on manual mode - cannot get the aperture settings to appear - where the aperture numbers should show in the data panel there are two short dashes - -. I can adjust the shutter speeds in manual mode ...

...picture Take the lens out and look the bottom side of the lens. There is a lever that operates the aperture leaves. If the aperture leaves does not move or moving slow, you have oils on the aperture ...

X-370S 35mm SLR Camera: what is the best aperture, shutter speed and iso f... What is the best aperture shutter speed and iso for my minolta x-370 when taking photos of people outdoors Your camera ...

hi, I have a minolta maxxum xtsi and don't know how to set the aperture/f-stop while shooting in full manual. there is an ISO setting option but that is for the speed of the film righ? or are ISA and ...

...manual mode and the "under-range LED" that continues blinking. I've tried different aperture settings and shutter speeds to see if the problem will go away, but it continues to not ...

...your light meter responds to changes in illumination. If everything seems fine, then check if the aperture of the lens works as intended. Then, without a lens nor film in bulb mode, check for the ...