Questions & Answers for: how to take apart a bike

...bike used, not ridden much, could not get to idle, suspected problem in carb pilot jet, took apart and cleaned carb, pilot was plugged, cleaned carb with spray cleaner, got flow through every port we ...

...bike? sounds like the box may have been squashed. send it back to where you got it from or its not that hard to spread the forks apart by pulling them. used to do this all the time when servicing ...

...bike. i didn't take it apart and don't have a manual. someone else took it apart This should help you:http://sheldonbrown.com/gearing/index.html. Also try ...

...bike apart too spray paint it couse i didnt like the colour and i put it bak together and now the handle bars are hard to turn i have tried loosing the bolds on the goose neck but that didnt work ...

apart. v twin bikes like harlys and bikes that look like then will have the spark plugs on the side of the motor sometimes under covers that may pull off or have screws. World of powersports is a site

...bike is later than 1996, I think, it probably has Bosch type connectors. These things come apart but it's like one of those Chinese puzzles to me. I have gotten them apart but I have to figure ...

...bike Without pulling the motor apart there is no way of telling, maybe the bearing caps were not tightened, possibly the ring gap was wrong and it seized in the bore and broke the rod, there are lots ...

apart and all i have are parts and i cant put it back together If you don't have a local bike shop to reassemble your seat or sell you a new one, you can probably find one to fit at Walmart or Target.

...apart, the bike worked completely fine, I just took it apart to clean it up all the rust. You did great with the assembly, however, you're off on the alignment. Try to adjust to pull the axle in the ...

...took the bike apart.can't find a plug or wire to plug it in Where are the wires to plug it in you have to buy an adapter the plugin is behind the right side battery panel if you're sitting on the ...