Questions & Answers for: KitchenAid how to take apart

bottom screw on handle loose How do I take the door apart so I may tighten or re insert the screw holding the handle on? the bottom screw came out and there are no screws to take the door ...

...My dishwasher stopped working. After troubleshooting it I found the pump-motor to be bad. I took it apart last week and ordered a replacement part. The only problem is, after leaving it apart for a ...

...stripped. However, we do not know what gears and how many are stripped without taking the unit apart. If you are not interested in taking the unit apart yourself, I would suggest taking in to a ...

the speed lever on my KSM 90 won't lock in the off position. I've got the mixer apart apart, but don't know how to fix it. Do you have a manual? You can download one from Kitchen ...

...to assume that you also mean the the head lock switch is not engaging, You have to take the mixer apart to re attach the mixer lock switch. There are several really good videos on youtube that

...couple of uses, it will not work at all. Can it be replaced or repaired. I started taking the unit apart, but after removing a bunch of screws, the unit is still not coming apart so I can reach the ...

how do you take a 5k5m150 apart Tap drip ring off, punch out pin through planetary. Remove back cover, unclip black wire and white wire from rear control board. Tip it upside down, remove pedestal. ...

How do I take apart crisper drawer? Crisper drawer needs to be taken apart to clean usually the drawers just lift out when pulled as far as you can .lift front edge

...the timing screws, but the problem remains. Check the carbon brushes, they could be worn out. Apart from that you will be pulling it apart to find the burning, that's where the fault will

...the lever that changes the speed and turns it on. Now, it won't turn on at all. We tried taking it apart to un-bend the lever, but that didn't seem to help. What part(s) do we need to replace to get ...