Questions & Answers for: ap network problem

AP (which connected to wired network) and another 3 APs. the first week its running, it was successful. all notebooks got the excellent wireless signal and can access internet. but today, it have been

AP Wireless Network issue with MC9060 Not able to connect to AP Wireless Network with MC9060 even with Open Authentication configured in the AP. Always its showing as Network out of Range in the ...

network address of the default IP address of the AP is 192.168.1.1, then the manager PC should be set at 192.168.1.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255

network address of the default IP address of the AP is 192.168.1.1, then the manager PC should be set at 192.168.1.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255

...AP is then cabled to the wired network to allow wireless clients access to, for example, Internet connections or printers. Additional APs can be added to the WLAN to increase the reach of the ...

...AP is in network x.x.102.0, which has it's own DHCP server. Only lan-port and WLAN are used on AP. I need this AP not to have it's own ip-adress, but devices, that connect to it,using WLAN, ...

Or is it simply extending your wireless network correctly and you only see one network? Bridges and APs usually have separate IPs, but the same network SSID is broadcast from them

...network. Some AP's broadcast the SSID and that can be read off the air when you attempt to connect. Those are the 'available' networks that show up in the wireless network list. If you are trying to ...

...network from the AP (Access Point) List. Enter the SSID Connects by typing in the name of wireless AP. WPS-PBC Connects easily by pressing the button of the wireless AP supporting PBC. WPS-PIN ...

...network traffic from the AP. If the wireless AP does not support this feature correctly, the wireless AP continues to send packets to the client network adapter even if the client network adapter ...