Questions & Answers for: antifreeze mixture

...will ensure that the chemical protection will not be depleted. Make sure that you use a 50/50 mixture of antifreeze and water. Pure antifreeze will not conduct heat and cause the engine to over

...antifreeze If you are talking about the a/c,just reply to this post and I will get an auto email and will help you further.Also,do you know how to fill it if it is the a/c? Greg Normally aspirated ...

...antifreeze and water mixture needed? Use any major brand antifreeze (green) available from Walmart, Sears, or auto parts store. Don't use Dexcool, though. Use a 50/50 premixed solution, or mix a 1:1 ...

...boiling points of the antifreeze mixture, as well as, change the ability of the mixture giving off heat. A typical 50/50 mixture has a freezing point of about -35*F and boiling point of about

...to drain antifreeze and replace making sure you have the right mixture of antifreeze and water for cold wheather. they sell a gauge for pretty cheap that can tell u what your mixture in your car

water. 50/50 mix to 55/45 mix is ideal for most applications. too much antifreeze and not enough water will not transfer heat as well as the proper mixture. make sure your mixture is 50-55% antifreeze

...mixture of antifreeze to water should work. I wouldn't use other colors unless they say they mix with all antifreeze mixtures. This has worked the best on my Hondas that I've owned over the

...( 13.5L ) - [50/50 mixture of Ethylene Glycol Antifreeze and water] - 5.9L Eng Engine Coolant - Volume: 17.00QTS. ( 16.1L ) - [50/50 mixture of Ethylene Glycol Antifreeze and water] - 4.7L ...

...mixture of water and antifreeze, could cause break down of internal parts, which could over time, cause damage to radiator, hoses, thermostat etc.... So, best thing to do, after adding or before ...

...mixture and add back antifreeze as soon as convenient. The heat capacity of proplyene glycol antifreeze plus water is: 20 volume percent antifreeze and water - 0.960 BTU/lb-degF 40 volume percent ...