...will need a hex screw driver, remove the old antenna by removing a little black cover on the antenna which hides the screw. remove it, insert the old and remove the screw cover and screw it back
...screw extractor with no luck - is there an antenna that will just fit over the old mount and make enough contact to get a signal or do I need to replace the whole darn mount? If you can't get the ...
...antenna screw is snapped off at the base. Is there anyway to fix this without having to remove the whole base of antenna? @womonsoft7 I'm giddy with childish excitement because this actually worked ...
antenna how to replace snapped off antenna rod screw type antenna you have to replace whole antenna.just screw out old antenna screw new antenna in place.
Question about 2003 Mercedes Benz ML350 Antenna, 03 Mercedes Benz ML350
...cover is dried out and cracked. feel off of car. If the antenna is screwed to base and you donĀ“t have a phobe in the car, just screw in any one you like, not very short because of radio ...
Question about Boombox Am Fm Tv Weather Band Cassette Radio Cfm-165tw
...screw. Some do not have a swiveling antenna; for these you have to remove the back of the case to get at the attachment screw. Keep the screw; it's guaranteed to fit when you attach the new antenna. ...
Question about Boombox Am Fm Tv Weather Band Cassette Radio Cfm-165tw
...antenna with a standard 'F' connector (Think Cable wire end) Find the matching screw on 'F' terminal on back of tv & screw/push on (screw on type of connector is better). Then turn on the tv, go ...
how to remove radio antenna from a 1996 monte carlo The top escutcheon unscrews, and there are two or three screws retaining the power antenna assembly to the fender. Unscrew the escutcheon and remove
Question about ProTalk XLS TK-3131 (15 Channels) 2-Way Radio
...screw at antenna. Carefully remove antenna parts and final screw. REPLACE ANTENNA, screw down, replace board and black,and gold screws. Replace antenna locknut, rubber side covers over put button and ...
Question about ProTalk XLS TK-3131 (15 Channels) 2-Way Radio
...screw it in place. If it comes with adhesive, remove the backing and carefully attach it to the cleaned surface. Reconnect the antenna cable to the new booster. Reinstall the antenna base cover. ...
Usually answered in minutes!
8,663 Questions
6,597 Questions
5,420 Questions
5,130 Questions
4,425 Questions