code error sc543 ricoh aficio 3260C SC-543 Heating roller fusing lamp overheat The detected fusing temperature stays at 200 °C or more for five seconds. Replacetment the PSU. Got it here: ...
Question about Aficio 1027 All-In-One Laser Printer
I have a ricoh 1027 but it does work codes sc 548 You have a problem with your fuser - either an overheat, or lack of heat. Can only be reset by technician in a service mode, once it is fixed
Question about Aficio 355 All-In-One Laser Printer
...up in the screen Code SC543-00 That code indicates a fuser overheat error or hot roller fusing lamp overheat. Refer to your manual if you have it. Good
Question about Aficio 2016 All-In-One Laser Printer
error code sc:553 showing ,what does this mean? machine won't work at all Fusing overheat. Could be defective thermistor, or Power supply. Problem can only be reset in service mode after cause is ...
Ricoh Ap2600 I see that there is standing SC543 Netzsp. Aus/ein? Please what ist it? Thanks a lot Fuser overheat error, Replace the fuser. -Carl
...overheat (software error) The detected heating roller temperature stays at 230°C or more for 1 second. �� Defective PSU �� Defective IOB ...
i need some solution for the error code for ricoh aficio 220,the error code was SC 543..can you help me for this problem..tnx.. Fusing overheat error Symptom: Detected fusing temperature remained ...
sc551 error in Ricoh aficio 1013 SC551 - Standby overheat Symptom: Temperature during standby or low-power mode remained too high for a specified interval (10 seconds or 25 seconds, depending on the ...
Fuser Lamp Overheat Check the thermistors and the thermalfusers.
Question about Aficio 1015 All-In-One Laser Printer
Ricoh Aficio 1015. Why is it not resetting? Code 543. Thermistor was defective. I changed thermistor and did try to reset but not resetting Code 543 - Description: Fusing overheat error. A fusing ...
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions