Questions & Answers for: amp buzz

Question about Audio Players & Recorders

1 Answer

...amp, it works fine and doesnt buzz. Whats wrong? HI SIR .THAT IS NOT BIG PROBLEM.ALL YOU HAVE TO DO MAKE SURE THAT YOUR PRE HAVE THE FLL.1 PROPERLLY EARTHED(THE GROUND FROM YOUR AMP ALSO GOES TO THE ...

Ad

Question about Audio Players & Recorders

1 Answer

buzz from lexicon lx-7 power amp Hi i have a problem wit my lexicon power amp, a buzzing/hum coming from all the channels. Its only very faint when its just the power amp on and nothing is connected ...

Ad

Question about Spider Iii 15 Modeling Guitar Amplifier 15 Watt

1 Answer

...the instrument, there's something thay may have come loose inside the instrument. If you unplug the cable from the amp., and the buzz persists, you'll have to have a competent tech. check your

Question about Spider Iii 15 Modeling Guitar Amplifier 15 Watt

1 Answer

...Pass, Ground buzz, changed over everything, still have buzz Hi there. If the amp buzzes with nothing plugged in, it's the amp. I've found that most hum comes from instruments, not the amp. Thanks ...

Question about Spider Iii 15 Modeling Guitar Amplifier 15 Watt

1 Answer

...amp buzzes whether the cable is plugged into the guitar or not. MAKE sure you have it connected to a three wire circuit that has the ground. A lot of these style amps will buzz if they are left ...

Question about Mg100dfx 100-Watt Combo Guitar Amplifier

1 Answer

...buzz, the amp is OK. In this case, cables and/or shielding and wiring in the guotar is suspect. Guitar pickups are sensitive to magnetic fields and you can search out these fields by moving and ...

...buzz with the amp switched on. If you can't get them to buzz, then the magnetic cartridge pre-amp in your amp has failed. If they do buzz. Take the wires to the cartridge off (make a note of where ...

Question about SL-1210 Turntable

1 Answer

Gas valve buzzing Gas valve was buzzing no gas flow, Installed new ignitor & coils also new flame sensor, Still buzzing & no gas flow. Ignitor glows then as soon as it should open the valve it

Question about SL-1210 Turntable

1 Answer

...buzz. Then (1) there's a bad connection between the deck and amp (phono plug or wire). (2) failed pre-amp inside the record deck itself. (3) failed pre-amp in the main amp. (this would not affect any ...

Question about SL-1210 Turntable

1 Answer

...amp buzz loud buzzing Most Amps will buzz or hum when there is a bad ground. It could be because you're plugged into an outlet with some other piece of equipment on it like a motor. if it buzzes on ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...