Questions & Answers for: Icom amber light

i got a icom746basestation the back light came on then went out. what wood it be. maby a bracker. The backlight module burns out after a few years, and you can obtain a replacement from Icom. Follow ...

...It will not release untill I push pitt rapidly. I changed mike's & antenna's/coex & reset radio. (Same problem) hi,where is the button to change the light from amber to green ...

light from amber to green ic 2100h how to change face light from amber to green icon-2100H power on, push v/mhz,then set to scroll thru to what you need Turn Dial to make aappropriate adjustments from

howto change face light from amber to green on ic2100H http://www.icomamerica.com/en/downloads/DownloadDocument.aspx?Document=2 Page 74 and 75

icom ic 726 REPLACEMENT OF DISPLAY LIGHTS I usually replace all of my radio lamps with Ultrabright LEDs. They come in many different colours and usually fit the same mounting hole as the incandescent ...

How to Fix Icom IC-M700 HF Transeiver? The RX signal (green light) is turned on and the TX (red light) turned on when the mic is pressed but there is no sound come out from the speaker. This is a ...

Transceiver fails to go into transmit when keyed. Receive works great. Red transmit light does not come nor does transceiver transmit on any mode nor band. Even if manual TX is pushed. Maybe TRrelay? ...

no prob on 20mtrs but on 40mtrs no power out using rtty setting RX light goes out with ptt but no tx light comes on check antenna connection and power output of your radio.

Icom 706 VFO has become very hard to turn even with the drag lever set to light. It sounds like the grease lubricating the shaft has hardened. OR, as I have read elsewhere, the shaft may have been ...

ICOM A210 aircraft radio transmits but is not recieving Transmitting clearly (according to listeners) however nothing heard. TX does illuminate with incoming call however nothing heard through ...