Questions & Answers for: Hyundai XG300 alarm low idle

Question about 2001 XG300

1 Answer

I have a hyundai xg300 and my remote to control my alarm got wet and is ruined. When I open the car door the alarm goes off and disabled me being able to start my car. How can I bypass the alarm to ...

Ad

2001 Hyundai XG Car Alarm Will Not Stop, Car Wont Start I somehow triggered my 2001 Hyundai XG Car Alarm to go off today and i can't get the car to start now. I must have opened the door the wrong way

Ad

Question about 2001 XG300

1 Answer

ELANTRA ALARM PROBLEM 1996 HYUNDAI ELANTRA 1.6 GLS. THE ALARM ONLY SHUTS OFF IF I DISCONNECT THE BATTERY. THE REMOTE HAS NO INFLUENCE ON THE ALARM SYSTEM, EVEN AFTER REPLACING THE REMOTE BATTERIES! ...

...alarm goes off sometimes without any reason. After all the codes came up the car tried to stall when coming back from a drive in the car. P0115 - Engine Coolant Temp Sensr - open/short P1159 - ...

Low Rpm You have a problem with the throttle sensor. Hyundai XG30, 1999, 62000km hello I am having misfire and engine has lack of power. I had the same codes P1191 and P1193 and had my throttle sensor

what is the proper air pressure for the low side port of the air conditioning system in a hyundai xg300? 32 psi to about 37 psi at idle.

Question about 2001 XG300

1 Answer

2001 xg 300 my alarm went off and the battery was dead in my key fob so now the disabling feature went in to effect and the car wont start so how do i reset the alarm so the car will start??? you have

Question about 2001 XG300

1 Answer

...idle RPM was getting fairly low at time. After looking online about these, I was about to get a new air flow meter when the car stalled for her at a light and added the codes P1191 and P1193. She was ...

Question about 2001 XG300

1 Answer

my last remote is broken and i can't start the car,is there a way to disconect the whole alarm system,so i can just start manualy with out remote YES THERE IS ! UNDER THE DASHBOARD SHOULD BE THE ALARM

Low Idle (750RPM) and shuts off when coming to a complete stop Recently I have had my MAF sensor replaced (Cleaning it didn't do anything) after my car started going into limp mode. After replacing it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...