Questions & Answers for: Chrysler Town & Country airbag igniter

...easy do-it-yourselfer project, takes a few special tools and must be wary of working around the airbag. i had the same problem - turned out I was sitting in the wrong car at the airport. Easy ...

Ad

...from the battery. Do not miss this step or your immobilizer will kick in or you could deploy your airbag. Remove the upper and lower plastic column covers from immediately behind your steering

Ad

...the steering wheel locks into place on the steering column. 4. Locate the three bolts holding the airbag onto the steering wheel. Remove the bolts and pull the airbag off of the steering wheel. ...

Question about 2001 Town & Country

1 Answer

airbag light is on Check to see if the horn works. If not then the clock spring for the airbag needs to be replaced. This part is also known as the airbag igniter.

...Follow these steps: 1. Disconnect the battery by removing the negative wire-you don't want the airbag to get activated while you are working 2. Remove everything around the steering and ignition ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...