Questions & Answers for: Mercedes-Benz airbag igniter

...one electrical connector for the cylinder, or two for the switch. Do not touch yellow wires or any airbag components, though they might have inflated, still be careful, you didn't say, and they keep ...

Passenger Airbag I am getting a message saying Passenger Airbag enable see Operator Manual. I don't have an Operator manual what do I have to do to clear the message as long as the srs light is not on

...the dash will not go off sometimes even though there is a passenger on the passenger side. Also the airbag off indicator light stays on with a passenger inside. SRS stand for Supplymentary Restraint ...

...column? Do I have to remove the steering wheel? If so how can I do so with out deploying the airbag? Also how do I remove the wiring harness from the back of the ignition? I can send pics if ...

...CONNECTORS LEADING TO THE ASSEMBLIES.PROBLEMS WITH THE PRE TENSIONERS WILL TURN ON THE SRS AIRBAG WARNING LIGHT. DONT MESS WITH SEAT BELT COULD SET OFF PRETENSIONERS AND AIRBAGS. LET THE ...

...on, the car was not starting and there was a ticking noise coming from the passenger side(near airbag) when I was trying to start the engine. I noticed that my ignition switch was slightly ...

...IGNITION ON WHEN DISCONNECTING THE ELECTRIC FROM THE SEAT AND SEAT BELT BUCKLE. It would cause the Airbag to be set

...on Airbag. Airbag light is on 9cff is a fault in the self tightening seat belt igniter circuit. Has the car been in an accident? The seat belts must be replaced after a collision if this code ...

i have code b1025 on mercedes c240 2001 airbag ignition circuit 1 driver side resistance to high B1025 Component B48 (Front Passenger Seat Occupied and Child Seat Recognition) is faulty

...on. Speculation without further details but 3 usual causes: 1. Clock spring in steering wheel for airbag open circuit. To Test - disconnect battery-disconnect airbag ribbon from steering wheel ...