...purge air out of the cooling system. There is a small diameter hose coming from near the top of the coolant tank(Not the cap!),this is the purge line. With the engine idling,pull the purge line from ...
...purge the air out of the cooling system as it is self purging on the northstar engine. The most common overheating problem with the Northstar engine is a blocked purge line. It's job is to purge air ...
Question about Cool Tech 34700Z Recovery, Recycling, Recharging
air purge not working" My last post had incorrect info. While my Cool Tech 34788 is in Automatic Mode, the message "Charge in progress, purging air, wait..." comes on and lasts about 5-7 minutes. Then
Question about Cool Tech 34700Z Recovery, Recycling, Recharging
...air purge hose from the tank,then press tank valve as needed to purge air from the tank) 3#Check the air purge solenoid & High pressure switch for proper operation.Hope this will solve your ...
Question about Cool Tech 34700Z Recovery, Recycling, Recharging
...the automatic air purge device & air purge solenoid repair or rebuild as require ID your internal tank if it comes back clean your air purge transducer can be out of calibration and needs ...
Question about Cool Tech 34700Z Recovery, Recycling, Recharging
...air purge hose from the tank,then press tank valve as needed to purge air from the tank) 3#Check the air purge solenoid & High pressure switch for proper operation.Hope this will solve your ...
...air being pumped P0445- Means Evaporative Emission Control System Purge Control Valve Circuit Shorted! Possible causes - Damage harness or connectors to the Purge Control Valve - The valve circuit is ...
Question about Cool Tech 34700Z Recovery, Recycling, Recharging
...air purge hose from the ISV tank, then carefully press tank valve as needed to blow out excess pressure from the ISV tank) After doing all above stapes and your problem still exist then replace air ...
Question about Cool Tech 34700Z Recovery, Recycling, Recharging
...air purge hose from the ISV tank, then carefully press tank valve as needed to blow out excess pressure from the ISV tank) After doing all above stapes and your problem still exist then replace air ...
...purge valve. Refer to Plastic Collar Quick Connect Fitting Service. Connect the EVAP canister purge valve electrical connector (1). Position the air cleaner assembly and install onto the
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
