Questions & Answers for: Chevrolet air in pipes

...drive about fifty miles before putting more gas in the tank. please help. thanks It souds like the air return line from the fuel filler pipe is plugged. When you fill up the car the air has to

2001 chevy tahoe dianostic codes p1416 and p0410 Air injection malfunction http://img245.imageshack.us/img245/39/218488404lv.jpg http://img241.imageshack.us/img241/4642/443329838do.jpg And some ...

...to find where the air flow goes. One of the pipes will be pointing away from a joint that it is supposed to be attached to. Check the airflow control knob area - behind it, that is - for loose

...pipes were blocked then it will not blow any cold air and you said it did blow cold air for a while. the way to find a leak is take soap water in a spray gun and spray the soap water in on the pipes ...

...pipe, but in any case it will come from the gas tank ( most likely on top of tank) to vent the air thats traped in the tank, when its pluged there is no other place for the air to go but out the ...

...AIR LOCK, LOOK FOR THE HIGHEST PIPE AND SEE IF THERE IS A BLEED VALVE, IF NOT TAKE BOTH PIPES OFF THE MATRIX FEEDS AND FLUSH OUT TO SEE IF IT IS BLOCKED, AND RECONNECT LOWEST PIPE FIRST AND FILL ...

...AIR INJECTION PUMP THAT HAS PIPES FEEDING INTO EXHAUST MANIFOLD WITH CHECK VALVES AND PIPE FEEDING AIR TO CATALYTIC CONVERTER TO KEEP IT FROM OVERHEATING.YOU HAVE TO REPLACE PIPES CAN WELL

...very cold, never when it is even above 10 degrees easy this question as its so simple ,look on the air intake and their should be a take off pipe from teh exhaust pipe manifold so warm air is picked ...

...2001 Code 1416 Removal Procedure Caution: Allow the engine to cool before servicing the secondary air injection AIR system in order to reduce the chance of severe burns. 1. Remove the clamp from

...to replace. Removal Procedure Caution: Allow the engine to cool before servicing the secondary air injection AIR system in order to reduce the chance of severe burns. 1. Remove the clamp from