Questions & Answers for: Pontiac Grand Prix air induction

a/c and heater 1. during the winter once ive turned on the heat the car simply does not blow hot air. when it did work the car would blow hot air and once i was at a light it would start to blow cool ...

...under the distributor cap and rotor button. when they fail, car dies suddenly and will not restart.fairly easy to replace and not to expensive. check for fuel pressure at fuel rail near injectors, if ...

I can't open the air box enough to change the filter 02 Grand Prix. I can't get the air box open enough to change the air filter. I can't believe I have to take off the mass air flow and all the other

Location of mass air flow sensor, 2000 Grand Prix GTP Where is the mass air flow sensor located on a 2000 Grand Prix GTP? Hi: The mass air flow sensor is a round sensor that is mounted in the air ...

...is to inspect the air induction tube for any leaks between the sensor and engine throttle body. You failed to mention what engine. Cleaning the mass air flow sensor wire may be all you need. Good ...

where is the air flow sensor located ? the air conditioner isn't blowing cold air. its fully charged, clutch is working, fuses are ok. it is in the air intake hose to the engine between the air ...

...air induction system. (Check the air induction system and be certain that there are no air or vacuum leaks, especially between the MAF and the throttle body, and that all of the hose clamps are tight ...

How do you fix a P0411 code on a 2006 Pontiac Grand Prix. Trouble code P0411 means: Secondary Air Injection (AIR) System Insufficient Air Flow Detected. Most likely airpump check valve went bad ...

P0101 briefly stalls while driving P0101: MAF or VAF A Circuit Range/Perf- Dirty mass air flow sensor - Dirty mass air filter - Mass air flow sensor harness is open or shorted - Mass air flow sensor ...

...Engine Coolant Temperature (ECT) Below Thermostat Regulations Temperature DTC P0411 : Secondary Air Injection (AIR) System Incorrect Air Flow Detected DTC P2440 : Secondary Air Injection (AIR) ...