Questions & Answers for: Ford Fusion air induction

The compressor and fan don't come on when the air conditioner is turned on and hot air comes through the vents. However, when the relays are removed and a test wire is inserted into the relay port, th

SEL V6, has engine stutter, engine codes read misfire on 4,5,6 cyl, with code p0171, bank 1 running lean, will changing fuel injectors fix this? or is it more in depth? You can verify injectors by, ..

...air induction system and secondary air induction system. A mechanic said i needed to replace my MAF "mass airflow sensor". So i did and had it reset, I'm just wondering if this was the ...

...is out of bumper-to-bumper warranty, check if the emissions warranty is still valid! Replace the AIR pump AND one-way check valve Test and clean the AIR pump AND test and replace the one-way air ...

my ex husband was in a roll over car accident in his 2006 ford fusion going 70 mph and his air bags didnt deploy. is there a recall on those or does he have a possible case for his injuries? Front air

...a rough idle  Confirm on the P0171=Lean. This would suggest not enough fuel for the amount of air applied. If you air intake wasn't closed off correctly, you may have been sucking excess

Secondary Air Injection Malfunction? My check engine light came on about a week ago, and I took it to Advance Auto Parts. They ran the diagnostic test with the computer and the guy told me it ...

code po491 on my 07 fusion Code 491 is for insufficient secondary air injection flow bank one. There is a device that pumps fresh air into the exhaust system to lower emissions. The sensor that ...

2007ford fusion code po410 and po491 4 cyl all fluids full check fuses first? The Secondary Air System pumps outside fresh air into the Exhaust System during cold engine start up. This additional air ...

Switch on airfilter ford fusion 1.4 tdci Can anyone tell me what the switch sensor on the back of the air filter assembly is called. it has three wires to the plug and a small pipe behind. Can someone