Questions & Answers for: Ford air induction

...thermostat housing cover. It is very difficult to see due to the location. If you want to get a good look at it, remove the air induction hose in-between the throttle body and the air clean

...air induction fresh air plenum from the throttle body. Check for water or oily residue at the PCV fresh air port. Disconnect the tube at the valve cover and check the tube for ice obstruction/ice. ...

my car is making a strange sound only when i accelerate{the sound is from the engine and it s oil leaking } could be an air induction pipe come off ,i would really need to hear it ,sorry

...Air Induction System with a Washable Pod Filter (Kingdragon) What is the recommended method for washing and cleaning these filters.... ? Cheers i think you can spray it with a hose and get it real ...

car stalls out when idoling in parked or sitting at red light Check for air leak on the induction & breather side or the engine.

...Induction System--Air leaks after the MAF, Vacuum leaks, Restricted air inlet, PVC system, Fuel purge system or Improperly seated dip stick. EGR--Leaking gasket, Stuck open EGR valve or Leaking ...

...air induction system and secondary air induction system. A mechanic said i needed to replace my MAF "mass airflow sensor". So i did and had it reset, I'm just wondering if this was the ...

...induction system is the air intake from the filter to the cylinder head. I would not do anything except clean the MAF sensor heated wires with spray carb cleaner or MAF sesnor cleaner if it's ...

...but it idles ok when engine is warm? Hi check electronic cold start valve or sensor ,idle control unit and air leaks around induction manifold. check cold start sensor thats usally the one thats ...

Where is the map sensor on a 2007 ford 500? Thank you! Built into the MAF (mass air flow) sensor. Located in the air induction system. Most likely mounted to the box that covers the air filter.