Questions & Answers for: ViewSonic air filter

...AIR-FILTER, but try this - What you have to do ... on te remonte control click the MENU button: Next scroll down to the Filter option and hold down the RESET button on the remote control until a ...

Air conditioning not cooling enough See above cleans the filter, which is somewhere in the basement. replace the filter and clean the indoor and outdoor coils. check the outside unit you will need to ...

Where can I get a new air filter? http://www.uaf.com/new-air-filter-product-announcements.aspx

My viewsonic projector shows overheat after it's start. then go to sleep after 10 sec. Are the air filters clean? It may have a faulty temperature sensor or indeed the temperature sensor may be ...

air filter" can you give me a instruction. Clean or replace the air-filter after every 100 hours of use to prevent overheating, which could damage the projector. 1 Make sure the projector is cool

...overheating and shuting down?? mike is the filter timer enabled. what are the total filter hours it has recorded. is the air filter and vents clean etc. it seems to be getting too hot as you ...

...boot up indicates faulty bulb or the circuit associated with it. If your air filter is dirty and clogged it could also mean high temperature warning. You have not mentioned which light is

...projector shuts down after 10minutes? Hi! I think it is the time to remove the cover and check for air filters blocked with dust. When this happens, air doesn't flow freely through the projector ...

...air filter on the PJ551? Air-Filter Cleaning the Air Filter The air filter should be cleaned as described below at intervals of approximately 100 hours. When the filter is used for approximately 100 ...

...is dusty and needs to be cleaned/replaced. (all projectors have a cooling fan and a filter to prevent dust from reaching the lamp. A faulty fan or a reduced air flow may cause an overheat