...air bell atop the manifold, the big tube running from the air bell to the air filter housing, or at one of the vacuum line fittings. -- A bad fuel pressure regulator valve or poorly fitting vacuum ...
...air bell atop the intake manifold are tight. Again, the idea is to get rid of vacuum leaks. This is unlikely, but worth checking. These bolts should never be tightened more than the specified torque ...
AC blow cold air when moving but warm air when stopped I have a 2006 chev cobalt that blow very cold air when moving but blows warm air when stopped. When the car moves again, the AC will resume ...
where do you add air conditioning fluid u cannot add air conditioning fluid it has to be put on an air con machine to be topped bup the same as a fridge
what does engine code p2440 indicate? P2440 Secondary Air Injection System Switching Valve Stuck Open Bank1 Problem is usually the air switching valve that operates the air line coming from air intake
What would cause2007 code p0411? Just had my air filter changed' P0411 Secondary air incorrect air flow,You are always going to get this the secondary air pump just runs 1 minute on a cold ...
sound from undercarriage when braking I'm hearing a noise from my undercarriage when I'm applying my brakes. It sounds close to a cranking noise, to almost sounding like rubber rubbing
mean code saying lien fuel an engine running lean is not getting enough feul or is getting too much air.your fuel injectors and air intake system work together to mix just the right amount of gasoline
...or heater on. I've seen a lot of guesses on this but have not seen a cure yet?? Could it be a Mass Air Flow Sensor??? mass air flow sensor would send a code. check the fuel regulator for right ...
...clean your throttle body. Use a rag, toothbrush and carb cleaner. Get it clean. P0102 is for Mass air flow sensor. Try cleaning it first. No toothbrush use qtips on tiny wires. Be careful not to ...
Usually answered in minutes!
1,428 Questions
818 Questions
485 Questions
212 Questions
74 Questions