...road coverage in the center of the road. is there any way to aim the headlights? Here's a link I found to a thread on GAOwnersClub.com. Hope This helps. Let me know if I can be of any more
...(these are what you can use to modify the headlights angle by the way) on the bottom bolt is aiming up and down so that it sits flush with the housing aroung the hole the bolt is supposed to
...up just below the mark on the wall. If it says VOL or doesn't say anything at all, then you need to aim the lights two inches below the mark. There should be a plastic (white or black, but usually ...
...ring over the light and install the retaining ring screws. Tighten them slightly.Check the aim of the headlight and adjust it, if necessary.Install the headlight bezel. Secure it with the ...
...then remove the bezel. Remove the headlight bezel To avoid turning the vertical or horizontal aiming screws, refer to the illustration before removing the headlight retainer. Unfasten the ...
I need to replace the headlight lenses. how do i aim them so they are centered on the road? There is alan head screws for the adjustment, However, you may want to have a serviceman do it. The head ...
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,208 Questions