Questions & Answers for: agitator stopped working

Question about Neptune MAH5500B Front Load Washer

1 Answer

spin My neptune front load washer is very quiet but I was wandering if it is working correctly. While it is washing you can hear it agitate for a second then it stops for a second. It does this the ...

Ad

Question about 24032\24036 Top Load Washer

1 Answer

The agitator works intermittently I have a Kenmore top load washer. .The agitator works intermittently. It agitates for a moment then stops and makes a ratcheting sound it will then start agitating ...

Ad

Question about Neptune FAV6800AW Top Load Washer

1 Answer

...agitator shaft is working properly, it is either the splines on the agitator or the bell coupling that is defective. If the agitator shaft does not work properly, the problem is in the

agitator stopped rotating, has checked for clogs, cleaned agitator, and pushed reset button, but still not rotating. Any ideas? I have a Kenmore upright vacuum cleaner model 116.36933. The agitator ...

Question about Neptune FAV6800AW Top Load Washer

2 Answers

...stopped adjutating but it drains the water out what is the problem The agitator is driven by a couple of different methods. The first is the agitator is spline and slips onto the matching splines of ...

Question about Neptune FAV6800AW Top Load Washer

1 Answer

agitator stops while in spin cycle Assuming that this is a basic Whirlpool top load, direct drive, neutral drain washer, the agitator is supposed to stop during the spin cycle. Please see the ...

agitator if necessary/possible. When the machine agitates, it stops working. The belt has a lot of tension at this point. stops working?? does it trip shutdown what your info is far too sparse to make

...agitator is only working in one direction so the washing is getting tangled The top portion of the wash tub agitator is designed to rotate in the clockwise direction. It should be intermittent. Turn ...

stopped agitating: after the machine would fill with water, sometimes it would stop, so I would move the dial slightly forward in the cycle, and then it would agitate. Could be a defective cycle timer

...stopped advancing. What can be the issue? Thanks! P.S. The "DRAIN & SPIN" and "BASKETCLEAN" modes are working good. The agitation in the "BASKETCLEAN" mode is also functioning well. Only the regular ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...