Questions & Answers for: agitator dogs

...agitator dogs are worn and need to be replaced. To do this remove the agitator cap and the bolt that holds down the agitator. With the bolt out you can remove the top section of the agitator (auger) ...

agitator dogs. If neither half are working, you might be having transmission issues. To change the dog kit, re,ove the top cap on the agitator and locate a 7/16" bolt. Remove the bolt and the agitator

...agitator dogs in agitators have only been used for the past 15 or so years. sounds like you need to take the agitator out and replace the 4 dogs in the top of the agitator. not a costly

...agitator to replace the dogs? remove the fabric softner assemble.if ther is a plastic cover remove it remove 1/2 bolt and reach down under agitator up. put agitator on the floor.put a foot on both ...

...agitator dogs will come out on your palm. Pay attention to how the agitator dogs are installed. Remove the worn agitator dogs and install the new ones. If the agitator dogs are not worn, check the ...

...agitator dogs inside the top of the agitator, they are bad for wearing out, sometimes the agitator may only agitate one way when the dogs are worn out. This is an instruction sheet that came with the ...

Agitator dogs are worn out. These are what grab the agitator and agitates the clothes. The dogs have fine teeth and are worn easily if the washer is overfilled or off balanced. The top of the agitator

...agitator dogs) this will give you a better view at what you are looking at. If this is a Whirlpool manufactured top loader, the problem may be a worn agitator cam assembly, worn agitator dogs, loose ...

...the agitator, bottom is fitted to transmission shaft. You pop the top cover, remove the 7/16 bolt and both halves together to change dogs of agitator. Pull halves apart to change dogs. Fairly

...agitator dogs check THE CAM DOGS INSIDE THE AGITATOR, AS THEY WILL HINDER THE AGITATION PROCESS. However in G.E models the cam dogs are replaced with what is called an agitator coupler. (located at ...