Questions & Answers for: adsl light

...ADSL light not blinking I have had this Zoom X5 Modem for 3 years. Normally, when I powered up it, the ADSL light would blinking for a while (about 10 to 15 seconds). After that, it would lighting ...

ADSL router keeps losing conection to the internet. Firstly the phone light flickers, then the internet connection light goes out. This is happening constantly now, I had no problems for about 2 years

...ADSL light blink, no logon Hi: Zoom ADSL 5554A USB and ADSL lights are blinking. Router will not respond to a ping to 10.0.0.2 Reset button has not effect. Power down, power up, does not change ...

ADSL light flashing! Recently got siemens gigaset SE587 router from Tiscali but it will not get a stable ADSL light unless I connect my old Modem into another phone socket in the house. And yes, all ...

...ADSL light I plug in my Belkin N1 modem router and everythings plugged in right but i get the ADSL light flashing, but when I plug in my normal old 2wire modem it works fine. The wires are all the ...

...light is off then there is a problem with the phone line to the ADSL modem or the modem is faulty or there is a problem at the telephome exchange. Disconnect the phone cable at the ADSL modem and ...

...ADSL data light keeps flashing and sometimes does not appear affecting my ability to acces the Internet. I usually have to re-boot my computer and this seems to solve the problem for a time. It is ...

adsl light on from my adsl modem .wireless is ok but i can't use internet connection.so u can say how to solve? IT HAVE A PIN HOLE OR REST SWITCH ON ITS BACK RESET YOUR ADSL RECONFIGURE THE ADSL TYPE ...

...ADSL light indicates the status of ADSL sync. When the modem is synchronized with the ADSL line card at the other end of the circuit/loop, the DSL light will be steady green. LAN light will glow ...

...ADSL light and the Internet light. When you switch the modem on you should first see the power light flash then go solid. Then the ADSL light will flash and then this should go solid. If this light ...