Questions & Answers for: adjusting car door latch

Question about 1989 Cutlass Supreme

2 Answers

back to the handle. Try your door now. You may need to adjust it more. On my car this worked for a while, then the latch started to drag on the striker again so I bent the rod to get a bit more stroke

Ad

Question about 1989 Cutlass Supreme

1 Answer

...adjustment level. in order for someone to help you tell us what you are driving car, truck what make model 2 door or 4 etc. we would be guessing as make the adjustment on the bottom hinge on the ...

Ad

Question about 2004 VUE

1 Answer

adjusting the door to reclose properly after replacement. No matter how I adjust the door, it seems to drop about 1/2 an inch when you open it. Any suggestions? Remember that there is a little play in

...latch area of the door and see if you can stick a screwdriver or a pen into the latch from the end and pull it towards the inside of the door while pulling on the handle. The screwdriver should pop ...

...wear on the top of the strike pin Ford doors are pretty easy to adjust in this vintage Try adjusting the latch first if you can't get the door to shut correctly then you may have to adjust the ...

Question about 1999 Venture

1 Answer

...have will be at the striker bolt, that the part where the door latch, latches to, to hold the door close, it unscrews and it will have some adjustment, but not much.There not adjustment for door

...door latch to work in unlock and disengage when locked? I just replaced the latch handle in 2001 Sequoia. I didn't have to unhook any wiring. On testing the new latch I found that in unlock the latch ...

...door latch's to has pushed out so the door stays ajar when closed. I can close and lock the door but it looks like the door is still slightly open when it's closed. adjust the latch so that the door ...

...car driver side door and it automatically says on the dash board that my door is open?? Any suggestions on what might be wrong. Its a 2011 Ford edge if that helps at all. thanks Your door ajar system ...

...door hinges need adjusting. This is not uncommon for the year, make and model of your Jeep!! Check latch to make sure the plastic cover over the lever for the s adjust latch or hinges Oil the latch ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...