Questions & Answers for: adjust water level ge washer

...in the tube that connects to the water level switch control? Sometime that will get blocked. You will need to make adjustments here because the air in the tube determines how much water fill the

...spinning vigorously. I don't know if it has to do with the pressure switch either. Over filling would be the pressure switch. It has to sense the water level and turn it off at the appropriate

...water out of my clothes... they are soaked coming out, and a lot of time it sets itself to "pause".. Is it a clogged line, or maybe because it's not level?I think it leans forward a bit and needs to ...

...piece inside the panel board which holds the water level knob is not there anymore, so I cannot adjust the water level. How can this be fixed? The machine is only 3 yrs old. replace water level ...

adjust water level GE wjre5550k2ww, I need more water. I have well water so I not concerned about using a little more water. you may need to check your pressure switch. if you have a mulitmeter use it

...level required as low, medium etc.The water level sensor will cut off the inlet valve when it reaches the desired set level. The water level should be a little over the clothes put into the

Water level No matter what water level I have set, the water only fills up approximately half way. Is there a way to adjust the water level? Need new vater level sensor switch

...this mean? Model number GFWR4800F1WW It means the washer makes an estimate of the size of the load, and can adjust the water level to suit, if you make that selection on the controls. Saves water

...adjust the water level on a GE stacked washer/dryer model GUD24? It only fills up with 1/3 of water and does not wash clothes completely. Thanks Total nightmare this HF stuff. New GE GUD24 stackable ...

...water level in the washer is not automatically adjusted anymore. Any idea what could be the problem? We have a GE washer model GTAN5250DOWN. We purchased it in 2012. There is a PreciseFill feature to ...