Questions & Answers for: Honda XLR 125 R adjust valves 125

....i haue to pull cluth in press elec start it carrys on hi mate on the clutch lever there will be a adjuster adjust the clutch cable or replace if stretched to much and check engine oil if low top up ...

...125 i changed the main jet to #92 and slow jet to #35 is this ok? If so how can i tune the carb. I am from Sri Lanka. Its a tropical country. The only way to know if the jetting is correct is to see ...

I need valve clearance specifications for a 125 cc honda engine I need the year & model first.

my honda xlr bogs out when i throttle bike bike runs ok with choke on full you can rev and all is well when choke off and you rev it and it just bogs out. any help? Have your carburator ...

2001 Honda XLR 125 R replace the clutch when is the right time to replace your clutch lining of Honda XLR 125?@ Hi, Anonymous when it starts to slip for this scenario you will need your service, parts

2001 Honda XLR 125 R fouls spark plugs my XLR 125 frequently changes the spark plug, I had my block changed to pin 2mm, my block to 54 mm, @ Hi, Anonymous and the usual suspects are: 1. Dirty air ...

...it one and a half turns. This will get you close enough to start and idle long enough for you to adjust by

125 R adjust idle mixture screw Hi, Anonymous it should be noted that the "AIR FUEL" mixture screw adjustment "ONLY" manages your idle and has no effect on any other circuit also any intake leaks must

...sticking. 6. Float level too low. 7. Carburetor bowl vent line clogged/blocked/pinched. 8. Idle adjusting screw set too low. 9. Air/fuel mixture screw set too lean. 10. Idle port, transfer ports, ...

...sticking. 6. Float level too low. 7. Carburetor bowl vent line clogged/blocked/pinched. 8. Idle adjusting screw set too low. 9. Air/fuel mixture screw set too lean. 10. Idle port, transfer ports, ...