...these two screws back in the same hole they came out of. IMPORTANT > do not tighten these two adjusters down. Only screw these in until they LIGHTLY seat. Now turn each adjuster one and one
When my bike starts it cutrs out almost immediatly I manage to get my bike started when the choke is right out but i cant let it go below liek 4000rpm...then as soon as i try to take the choke off the
...the idle setting. 4) Check to make sure the chamber is not flooding. If it is, adjust the valves. 5) Your single spark plug is sooted up and not sparking. Remove it and clean the head, and
...without running these components must be "PROPERLY" cleaned and reassembled "CORRECTLY" before any adjustments can be made. Tuning your carburetor is fairly simple once you understand the basic ...
...running like this for a long time. Can this damage my engine? I run my bike pretty hard. I will be adjusting the valves this weekend, I just want to know if I caused her any damage. I think you
adjust your valve clearance. With then spark plug out, turn the motor over by hand and watch the valves open and close, if anything is in a bind or if feels tight then your 180 degrees out which means
...125 R hard starting I have a Honda CBR125R 2010. I'm having issues with it starting at the moment. It will do one of 3 things: either start first time no problems. Won't start at all for a couple of ...
...125 R valve clearance I want to adjust tappets on my 2006 125cbr rw6 can you please tell me valve clearances thanks Hi, Anonymous for this scenario you will need your service/owners manual if you ...
Usually answered in minutes!
99 Questions
89 Questions
